Product Advantages
SikaBond 52 Wood Floor is a one component, solvent free, fast curing elastic adhesive.
Fast curing
Good intial tack
Suitable for use with most common woods incl Beech, Maple and Bamboo
For Full Surface bonding: Solid and engineered wood floors (strips, longstrips, planks, panels, boards), mosaic parquet, industrial parquet, lam parquet, wood paving (residential) as well as chip boards, plywood and OSB can be bonded, use with trowel
For the Sika AcouBond System: Solid wood boards (tongued and grooved), 3-ply engineered wood as well as chip boards plywood and herringbone blocks can all be bonded, use with Sika Layer 3mm or Sika Layer 5mm mats and a barrel gun
For Beaded Application: Solid wood boards, 3-ply engineered wood as well as chip boards can be bonded, use with barrel gun
Technical Spec
Skinning/Laying time: 60 mins (+23°C/50% RH)
3.5 mm / 24h (+23°C / 50% r. h.) The floor may be walked on/sanded 12 hours to 24 hours after installation ( +23°C / 50% RH up to 1 mm adhesive thickness dependent on climatic conditions and adhesive layer thickness).
Floor can be sanded after 12 hours (full surface bonding, +23°C / 50% RH, up to 1 mm adhesive thickness)
Preparation
The substrate must be even, totally dry, clean, free from cracks and physically sound.
Concrete/Cement screed: Must be ground and thoroughly cleaned with industrial vacuum cleaner.
Anhydrite screed/Anhydrite flowable screed: Must be ground and thoroughly cleaned with industrial vacuum cleaner shortly before bonding starts.
Broadcast mastic asphalt: Must be primed with Sika Primer MB / SikaBond Rapid DPM. Please refer to the respective Product Data Sheet.
Glazed ceramic and old ceramic tiles: Degrease or grind the tile surfaces and vacuum thoroughly.
Wood / gypsum boards (e.g. chipboards, plywood): Glue / screw the boards to the substructure. They must be fixed to the substrate.
SikaBond -52 Wood Floor can be used without priming on cementitious floors, anhydrite floors, chipboards, concrete and ceramic tiles.
For broadcast mastic asphalt, cementitious floors with an excessive moisture content and for use over old adhesive residues or on weak substrates use Sika Primer MB / SikaBond Rapid DPM.
Cleaning
Cleaning: Acetone or ethanol will remove but hardened adhesive can only be removed mechanically.
Storage / Shelf life
12 months from date of production if stored in undamaged, original sealed containers, in dry conditions and protected from direct sunlight at temperatures between +10°C and +25°C.
Larger View
