Quick-Step Alpha Vinyl Illume Oyster concrete AVMTU40275 Rigid Vinyl Flooring
Quick-Step Alpha Vinyl Illume Oyster concrete AVMTU40275 Rigid Vinyl Flooring
SAVE MORE
Less than 4m² | Over 4m² |
£47.95m² | £38.83m² |
Pack Price £105.48 |
Pack Price £85.43 |
Less than 4m²
£47.95m²
Pack Price
£105.48
Over 4m²
£38.83m²
Pack Price
£85.43
Actual m²: | 2.20 |
Pack Price Inc. VAT: | £105.48 |
Total Price Inc. VAT: | £105.48 |
To cover 0m² you will need to purchase 1 packs which will give you a total of 2.20m² of flooring. * don't have your m² use our room calculator above
Add 5% Wastage?
Add 5% Wastage?
To cover your floor 0m² you will need to purchase 1 packs which will give you a total of 2.20m² of flooring.
Flooring Type – Quick-Step Alpha Rigid Vinyl
Quick-Step Alpha Rigid Vinyl flooring is extremely versatile and durable with scratch and stain resistant technology, making it the perfect choice for any room in your home. It's rigid core means in most cases you don't need to prepare your subfloor before fitting. Its water-repellent technology combined with its advanced watertight click system ensures a fully waterproof floor. Alpha vinyl flooring is exceptionally thin and is underfloor heating compatible.
Finish – High-performance top layer
Protected with anti scratch and anti stain technology. This protects from stains, dirt and scratches, making maintenance easy. The extra matt surface finish gives a totally natural look.
Fit – Uniclic (advanced watertight click)
A click fitting system means that the boards can simply be clicked together to provide straight forward installation. The planks of flooring have interlocking joints which have been machined onto the edge. These joints click and lock together to provide a tight and secure fit without the need for nails or glue. The improved drop-down technology provides extra strength due to the vertical and horizontal locking.
Installation method – Underlay built into the board (Click)
Underlay built into the board for an easier install. The planks of flooring are attached together by the click fitting system, but they are not fixed directly down to the subfloor; instead they float on top of the subfloor. This method of installation is compatible with underfloor heating.
Acclimatisation
Quick-Step Livyn needs 2 days to acclimatise to its surroundings before it can be installed. It should be left in the room where it is going to be installed, which should be dry (no new drying plaster or concrete) and heated to between 18 to 30°.
Maintenance & Aftercare
Quick-Step vinyl floors are easy to look after and maintain. Simply sweep on a daily basis with a soft bristle brush to remove any dirt or dust, and then clean on a weekly basis (more often if needed) with Quick-Step cleaning kit spray mop. Use felt protector pads on the bottom of furniture and never drag heavy or sharp object across the floor. This will ensure that you floor keeps looking at its best for as long as possible.
Specification | ||
---|---|---|
Coverage |
2.20m²
|
|
Board Dimensions |
(L) 856mm x (W) 428mm x (D) 6mm
|
|
Profile Type |
Uniclic
|
|
Installation |
Comes with underlay attached so no separate underlay should be installed
|
|
Warranty |
Lifetime domestic use
|
|
Planks per pack |
6
|
|
Construction |
Vinyl
|
|
Range |
Quickstep Illume Click
|
Flooring Type – Quick-Step Alpha Rigid Vinyl
Quick-Step Alpha Rigid Vinyl flooring is extremely versatile and durable with scratch and stain resistant technology, making it the perfect choice for any room in your home. It's rigid core means in most cases you don't need to prepare your subfloor before fitting. Its water-repellent technology combined with its advanced watertight click system ensures a fully waterproof floor. Alpha vinyl flooring is exceptionally thin and is underfloor heating compatible.
Finish – High-performance top layer
Protected with anti scratch and anti stain technology. This protects from stains, dirt and scratches, making maintenance easy. The extra matt surface finish gives a totally natural look.
Fit – Uniclic (advanced watertight click)
A click fitting system means that the boards can simply be clicked together to provide straight forward installation. The planks of flooring have interlocking joints which have been machined onto the edge. These joints click and lock together to provide a tight and secure fit without the need for nails or glue. The improved drop-down technology provides extra strength due to the vertical and horizontal locking.
Installation method – Underlay built into the board (Click)
Underlay built into the board for an easier install. The planks of flooring are attached together by the click fitting system, but they are not fixed directly down to the subfloor; instead they float on top of the subfloor. This method of installation is compatible with underfloor heating.
Acclimatisation
Quick-Step Livyn needs 2 days to acclimatise to its surroundings before it can be installed. It should be left in the room where it is going to be installed, which should be dry (no new drying plaster or concrete) and heated to between 18 to 30°.
Maintenance & Aftercare
Quick-Step vinyl floors are easy to look after and maintain. Simply sweep on a daily basis with a soft bristle brush to remove any dirt or dust, and then clean on a weekly basis (more often if needed) with Quick-Step cleaning kit spray mop. Use felt protector pads on the bottom of furniture and never drag heavy or sharp object across the floor. This will ensure that you floor keeps looking at its best for as long as possible.
Specification | ||
---|---|---|
Coverage |
2.20m²
|
|
Board Dimensions |
(L) 856mm x (W) 428mm x (D) 6mm
|
|
Profile Type |
Uniclic
|
|
Installation |
Comes with underlay attached so no separate underlay should be installed
|
|
Warranty |
Lifetime domestic use
|
|
Planks per pack |
6
|
|
Construction |
Vinyl
|
|
Range |
Quickstep Illume Click
|