Osmo Wood Wax Finish Clear Extra Thin 1101
Osmo Wood Wax Finish Clear Extra Thin 1101
How much will I need?
Osmo Wood Wax Finish Clear Extra Thin 1101 Clear is for interior use with exotic oily wood species such as Merbau, Wenge, Jatoba, etc.
Features and Highlights
- A solvent-based interior wood oil for woods with a tight grain or high oil content
- Excellent resistance to water and liquid spillages
- Resistant to dirt, scuffs, and abrasion
- Easy to apply and maintain
- Does not crack, peel, flake, or blister
- Dries to a clear, satin finish
- Safe for humans, animals, and plants once dry
- Mild odour formulation
- High V.O.C
Overview
Osmo Wood Wax Finish Clear Extra Thin is suitable for a wide range of hardwood interior surfaces, including wall and ceiling paneling, wooden flooring, furniture and kitchen worktops. Due to its water-repelling qualities, it is especially well suited for use in wet / moisture-rich environments, such as kitchens and bathrooms.
Preparation
Wooden surfaces to be treated with Osmo Wood Wax Finish 1101 must be clean and dry with a moisture content of no more than 20%. Because dense exotic hardwoods tend to be oily in nature, it is recommended that surfaces to be oiled are de-greased with white spirit and a lint-free cloth prior to application to help with the absorption.
- Clean or lightly sand old microporous (oiled) finishes
- Varnishes and other surface coatings must be fully removed back to bare wood before application
- Small cracks, larger dents, and small holes in the wood should be filled with a suitable wood filler
- Sand carefully before application starting with a coarse paper - final sanding for flooring should be with a P120 - P150 grit paper, for furniture P220 - P240 grit paper
- Remove all traces of sanding dust with a brush or vacuum cleaner prior to application
Application
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. This product can be brushed, wiped, dipped or spray applies.
- Stir Osmo Wood Wax Finish thoroughly before and periodically during application
- Apply the 1st coat thinly and evenly along the grain with an Osmo Soft Tip Brush or lint-free cotton cloth
- Allow to dry for 30 minutes, then remove any surplus oil with a clean cloth
- Allow 12 hours for the first coat to dry before applying the second coat in the same way as the first
- Apply a second coat as above if required
Recommended number of coats: 1 coat for furniture / 2 coats for flooring.
Aftercare
Surfaces treated with Osmo Wood Wax Finish Extra Thin should be dry wiped from time to time with a soft, lint-free cloth. To remove day-to-day, dust, dirt, scuffs, and light marks use Osmo Spray Cleaner
Specification | ||
---|---|---|
Coverage |
20.00m²
|
|
Brand |
Osmo
|
|
Use |
Interior
|
|
Finish |
Satin
|
Osmo Wood Wax Finish Clear Extra Thin 1101 Clear is for interior use with exotic oily wood species such as Merbau, Wenge, Jatoba, etc.
Features and Highlights
- A solvent-based interior wood oil for woods with a tight grain or high oil content
- Excellent resistance to water and liquid spillages
- Resistant to dirt, scuffs, and abrasion
- Easy to apply and maintain
- Does not crack, peel, flake, or blister
- Dries to a clear, satin finish
- Safe for humans, animals, and plants once dry
- Mild odour formulation
- High V.O.C
Overview
Osmo Wood Wax Finish Clear Extra Thin is suitable for a wide range of hardwood interior surfaces, including wall and ceiling paneling, wooden flooring, furniture and kitchen worktops. Due to its water-repelling qualities, it is especially well suited for use in wet / moisture-rich environments, such as kitchens and bathrooms.
Preparation
Wooden surfaces to be treated with Osmo Wood Wax Finish 1101 must be clean and dry with a moisture content of no more than 20%. Because dense exotic hardwoods tend to be oily in nature, it is recommended that surfaces to be oiled are de-greased with white spirit and a lint-free cloth prior to application to help with the absorption.
- Clean or lightly sand old microporous (oiled) finishes
- Varnishes and other surface coatings must be fully removed back to bare wood before application
- Small cracks, larger dents, and small holes in the wood should be filled with a suitable wood filler
- Sand carefully before application starting with a coarse paper - final sanding for flooring should be with a P120 - P150 grit paper, for furniture P220 - P240 grit paper
- Remove all traces of sanding dust with a brush or vacuum cleaner prior to application
Application
Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. This product can be brushed, wiped, dipped or spray applies.
- Stir Osmo Wood Wax Finish thoroughly before and periodically during application
- Apply the 1st coat thinly and evenly along the grain with an Osmo Soft Tip Brush or lint-free cotton cloth
- Allow to dry for 30 minutes, then remove any surplus oil with a clean cloth
- Allow 12 hours for the first coat to dry before applying the second coat in the same way as the first
- Apply a second coat as above if required
Recommended number of coats: 1 coat for furniture / 2 coats for flooring.
Aftercare
Surfaces treated with Osmo Wood Wax Finish Extra Thin should be dry wiped from time to time with a soft, lint-free cloth. To remove day-to-day, dust, dirt, scuffs, and light marks use Osmo Spray Cleaner
Specification | ||
---|---|---|
Coverage |
20.00m²
|
|
Brand |
Osmo
|
|
Use |
Interior
|
|
Finish |
Satin
|