Total£54.40
Elka ERTU40371 Signet Rigid Luxury Vinyl Tile Click Flooring 1.848m²
In stock
Product Code:
ERTU40371
£29.44m²
£24.53
Elka ERTU40371 Signet Rigid Luxury Vinyl Tile Click Flooring 1.848m²
Calculate Your Requirements
Room Calculator
| Actual m²: | 1.85 |
| Pack Price Inc. VAT: | £54.40 |
| Total Price Inc. VAT: | £54.40 |
To cover 0m² you will need to purchase 1 packs which will give you a total of 1.85m² of flooring. * don't have your m² use our room calculator above
Add 5% Wastage?
1 pack required
Total
£54.40
Add 5% Wastage?
To cover your floor 0m² you will need to purchase 1 packs which will give you a total of 1.85m² of flooring.
£29.44m²
£24.53
Wood Flooring Type – Elka Rigid Vinyl
Elka Rigid vinyl flooring is extremely versatile, durable with scratch and stain resistant technology, making it the perfect choice for any room in your home. It's rigid core means in most cases you don't need to prepare your subfloor before fitting. Its water-repellent technology combined with its advanced watertight click system ensures a fully waterproof floor. Elka vinyl flooring is exceptionally thin and is underfloor heating compatible.
Finish – High-performance top layer
Protected with Scratch and Stain Guard technology. This protects from stains, dirt and scratches, making maintenance easy. The extra matt surface finish gives a totally natural look.
Fit – Click
A click-fitting system means that the boards can simply be clicked together to provide a straightforward installation. The planks of flooring have interlocking joints which have been machined onto the edge. These joints click and lock together to provide a tight and secure fit without the need for nails or glue. The improved drop-down technology provides extra strength due to vertical and horizontal locking.
Installation method – Float over an underlay (Click)
Floating a floor over an underlay means the planks of flooring are attached together by the click fitting system, but they are not fixed directly down to the subfloor; instead they float over a layer of underlay. This method of installation is compatible with underfloor heating.
Acclimatisation
Minimum of 2 days to acclimatise to its surroundings before it can be installed. It should be left in the room where it is going to be installed, which should be dry (no new drying plaster or concrete) and heated to between 18 to 30°.
Maintenance & Aftercare
Vinyl floors are easy to look after and maintain. Simply sweep on a daily basis with a soft bristle brush to remove any dirt or dust, and then clean on a weekly basis (more often if needed). To prevent any unwanted dents or damage to your hardwood, remember to remove outdoor footwear, use felt protector pads on the bottom of furniture and never drag heavy or sharp object across the floor. This will ensure that your floor keeps looking at its best for as long as possible.
| Specification |
|
|
|---|---|---|
| Coverage |
1.85m²
|
|
| Board Dimensions |
(L) 610mm x (W) 303mm x (D) 5mm
|
|
| Profile Type |
Uniclic® patented design with a micro bevelled edge around all four sides of each plank
|
|
| Installation |
Float over underlay (Underlay built into board)
|
|
| Warranty |
25 Year Domestic Warranty
|
|
| Planks per pack |
10
|
|
| Construction |
Vinyl
|
|
| Range |
Elka
|
|
| Wear Layer |
N / A
|
Write Your Own Review
Wood Flooring Type – Elka Rigid Vinyl
Elka Rigid vinyl flooring is extremely versatile, durable with scratch and stain resistant technology, making it the perfect choice for any room in your home. It's rigid core means in most cases you don't need to prepare your subfloor before fitting. Its water-repellent technology combined with its advanced watertight click system ensures a fully waterproof floor. Elka vinyl flooring is exceptionally thin and is underfloor heating compatible.
Finish – High-performance top layer
Protected with Scratch and Stain Guard technology. This protects from stains, dirt and scratches, making maintenance easy. The extra matt surface finish gives a totally natural look.
Fit – Click
A click-fitting system means that the boards can simply be clicked together to provide a straightforward installation. The planks of flooring have interlocking joints which have been machined onto the edge. These joints click and lock together to provide a tight and secure fit without the need for nails or glue. The improved drop-down technology provides extra strength due to vertical and horizontal locking.
Installation method – Float over an underlay (Click)
Floating a floor over an underlay means the planks of flooring are attached together by the click fitting system, but they are not fixed directly down to the subfloor; instead they float over a layer of underlay. This method of installation is compatible with underfloor heating.
Acclimatisation
Minimum of 2 days to acclimatise to its surroundings before it can be installed. It should be left in the room where it is going to be installed, which should be dry (no new drying plaster or concrete) and heated to between 18 to 30°.
Maintenance & Aftercare
Vinyl floors are easy to look after and maintain. Simply sweep on a daily basis with a soft bristle brush to remove any dirt or dust, and then clean on a weekly basis (more often if needed). To prevent any unwanted dents or damage to your hardwood, remember to remove outdoor footwear, use felt protector pads on the bottom of furniture and never drag heavy or sharp object across the floor. This will ensure that your floor keeps looking at its best for as long as possible.
| Specification |
|
|
|---|---|---|
| Coverage |
1.85m²
|
|
| Board Dimensions |
(L) 610mm x (W) 303mm x (D) 5mm
|
|
| Profile Type |
Uniclic® patented design with a micro bevelled edge around all four sides of each plank
|
|
| Installation |
Float over underlay (Underlay built into board)
|
|
| Warranty |
25 Year Domestic Warranty
|
|
| Planks per pack |
10
|
|
| Construction |
Vinyl
|
|
| Range |
Elka
|
|
| Wear Layer |
N / A
|
Write Your Own Review
This Item
Related Products
Questions and Answers
Customers Also Bought...
