Elka ERPU40368 Eden Rigid Luxury Vinyl Click Flooring 2.128m²
Elka ERPU40368 Eden Rigid Luxury Vinyl Click Flooring 2.128m²
Actual m²: | 2.13 |
Pack Price Inc. VAT: | £62.64 |
Total Price Inc. VAT: | £62.64 |
To cover 0m² you will need to purchase 1 packs which will give you a total of 2.13m² of flooring. * don't have your m² use our room calculator above
Add 5% Wastage?
Add 5% Wastage?
To cover your floor 0m² you will need to purchase 1 packs which will give you a total of 2.13m² of flooring.
Wood Flooring Type – Elka Rigid Vinyl
Elka Rigid vinyl flooring is extremely versatile, durable with scratch and stain resistant technology, making it the perfect choice for any room in your home. It's rigid core means in most cases you don't need to prepare your subfloor before fitting. Its water-repellent technology combined with its advanced watertight click system ensures a fully waterproof floor. Elka vinyl flooring is exceptionally thin and is underfloor heating compatible.
Finish – High-performance top layer
Protected with anti scratch and anti stain technology. This protects from stains, dirt and scratches, making maintenance easy. The extra matt surface finish gives a totally natural look.
Fit – Unizip (advanced watertight fit)
The Unizip technology solves this inconvenience. Unilin invented a locking profile that makes it possible to lay a herringbone floor with only one type of panel. The Unizip profile positions the tongue and groove around the panel in such a way that the short side of the panel can be locked into the long side of the adjacent panel, without having to compromise on locking strength. Unizip is available for all main types of flooring.
Installation method – Underlay built into the board (Unizip)
Underlay built into the board for an easier install. Revolutionary new Unizip click system means that laying a Elka herringbone floor only requires one type of plank. For a traditional herringbone floor you’d normally need two types that click together on different sides. This unique design results in less waste and less complication - so you can say hello to your beautiful new herringbone floor in no time!
Acclimatisation
Elka Vinyl needs 2 days to acclimatise to its surroundings before it can be installed. It should be left in the room where it is going to be installed, which should be dry (no new drying plaster or concrete) and heated to between 18 to 30°.
Maintenance & Aftercare
Elka vinyl floors are easy to look after and maintain. Simply sweep on a daily basis with a soft bristle brush to remove any dirt or dust, and then clean on a weekly basis (more often if needed) with Quick-Step cleaning kit spray mop. Use felt protector pads on the bottom of furniture and never drag heavy or sharp object across the floor. This will ensure that you floor keeps looking at its best for as long as possible.
Specification | ||
---|---|---|
Coverage |
2.13m²
|
|
Board Dimensions |
(L) 1251mm x (W) 189mm x (D) 5mm
|
|
Profile Type |
Uniclic® patented design with a micro bevelled edge around all four sides of each plank
|
|
Installation |
Float over underlay (Underlay built into board)
|
|
Warranty |
25 Year Domestic Warranty
|
|
Planks per pack |
9
|
|
Construction |
Vinyl
|
|
Range |
Elka
|
|
Wear Layer |
N / A
|
Wood Flooring Type – Elka Rigid Vinyl
Elka Rigid vinyl flooring is extremely versatile, durable with scratch and stain resistant technology, making it the perfect choice for any room in your home. It's rigid core means in most cases you don't need to prepare your subfloor before fitting. Its water-repellent technology combined with its advanced watertight click system ensures a fully waterproof floor. Elka vinyl flooring is exceptionally thin and is underfloor heating compatible.
Finish – High-performance top layer
Protected with anti scratch and anti stain technology. This protects from stains, dirt and scratches, making maintenance easy. The extra matt surface finish gives a totally natural look.
Fit – Unizip (advanced watertight fit)
The Unizip technology solves this inconvenience. Unilin invented a locking profile that makes it possible to lay a herringbone floor with only one type of panel. The Unizip profile positions the tongue and groove around the panel in such a way that the short side of the panel can be locked into the long side of the adjacent panel, without having to compromise on locking strength. Unizip is available for all main types of flooring.
Installation method – Underlay built into the board (Unizip)
Underlay built into the board for an easier install. Revolutionary new Unizip click system means that laying a Elka herringbone floor only requires one type of plank. For a traditional herringbone floor you’d normally need two types that click together on different sides. This unique design results in less waste and less complication - so you can say hello to your beautiful new herringbone floor in no time!
Acclimatisation
Elka Vinyl needs 2 days to acclimatise to its surroundings before it can be installed. It should be left in the room where it is going to be installed, which should be dry (no new drying plaster or concrete) and heated to between 18 to 30°.
Maintenance & Aftercare
Elka vinyl floors are easy to look after and maintain. Simply sweep on a daily basis with a soft bristle brush to remove any dirt or dust, and then clean on a weekly basis (more often if needed) with Quick-Step cleaning kit spray mop. Use felt protector pads on the bottom of furniture and never drag heavy or sharp object across the floor. This will ensure that you floor keeps looking at its best for as long as possible.
Specification | ||
---|---|---|
Coverage |
2.13m²
|
|
Board Dimensions |
(L) 1251mm x (W) 189mm x (D) 5mm
|
|
Profile Type |
Uniclic® patented design with a micro bevelled edge around all four sides of each plank
|
|
Installation |
Float over underlay (Underlay built into board)
|
|
Warranty |
25 Year Domestic Warranty
|
|
Planks per pack |
9
|
|
Construction |
Vinyl
|
|
Range |
Elka
|
|
Wear Layer |
N / A
|