Bona R848 15kg Flexible Wood Flooring Adhesive
Application
Each tub covers approximately 15m². Apply with a Bona trowel.
Product Advantages
Bona R848 is an elastic 1-component Silane based adhesive for dimensionally stable, multi layered engineered parquet and solid boards (min thickness 15mm) up to 190mm wide.
Tensions to the subfloor are reduced.
The adhesive hardens by a chemical reaction with moisture.
Suitable subfloors;
Cementitious screed (CT) according to EN 13813
Floors leveled with leveling compounds (at least 2 mm thick, resistant against plasticizer migration)
Calcium sulfate screed (CA) according to EN 13813
Chipboard V100
Other dry and sound subfloors
Preparation
Subfloor preparation should be in accordance with British Standard BS 8201 2011.
The substrate must in general be even, totally dry, clean, free from cracks and physically sound.
The surface should also be slightly textured. If applicable, it must meet the requirements of local standards or codes of practice. If necessary it should be professionally prepared for laying. A primer is typically not needed. If the subfloor is problematic the use of a primer like Bona D501
Cleaning
Cleaning: Acetone or ethanol will remove but hardened adhesive can only be removed mechanically.
Storage / Shelf life
Shelf life: 12 months
The temperature must not fall below +5°C or exceed +25°C during storage, Store in a cool, dry, well-ventilated place.
| Specification | ||
|---|---|---|
| Coverage |
15.00m²
|
|
| Brand |
Bona
|
|
| Colour |
N/A
|
|
| Use |
Interior
|
Application
Each tub covers approximately 15m². Apply with a Bona trowel.
Product Advantages
Bona R848 is an elastic 1-component Silane based adhesive for dimensionally stable, multi layered engineered parquet and solid boards (min thickness 15mm) up to 190mm wide.
Tensions to the subfloor are reduced.
The adhesive hardens by a chemical reaction with moisture.
Suitable subfloors;
Cementitious screed (CT) according to EN 13813
Floors leveled with leveling compounds (at least 2 mm thick, resistant against plasticizer migration)
Calcium sulfate screed (CA) according to EN 13813
Chipboard V100
Other dry and sound subfloors
Preparation
Subfloor preparation should be in accordance with British Standard BS 8201 2011.
The substrate must in general be even, totally dry, clean, free from cracks and physically sound.
The surface should also be slightly textured. If applicable, it must meet the requirements of local standards or codes of practice. If necessary it should be professionally prepared for laying. A primer is typically not needed. If the subfloor is problematic the use of a primer like Bona D501
Cleaning
Cleaning: Acetone or ethanol will remove but hardened adhesive can only be removed mechanically.
Storage / Shelf life
Shelf life: 12 months
The temperature must not fall below +5°C or exceed +25°C during storage, Store in a cool, dry, well-ventilated place.
| Specification | ||
|---|---|---|
| Coverage |
15.00m²
|
|
| Brand |
Bona
|
|
| Colour |
N/A
|
|
| Use |
Interior
|
