0
My Basket Basket

You have no items in your shopping basket.

0116 2741050
Monday - Friday 8am - 5:30pm | Saturday 9am - 1pm

 

Bona Mega Natural 1 - Component 5L

£83.99 Incl. VAT

Availability: In stock

Product Advantages

Bona Mega Lacquer is a 1 part polyurethane topcoat, so no need for any mixing.
Clean and safe low emissions
Used for heavy domestic traffic and commercial areas
High resistance to scuffing marks and wear
Can be used with underfloor heating
Easy application, with good flow and levelling


Technical Spec
Coverage rate: 8-10 m² /litre (100-120g/m² ) per coat

Drying time, until: - Ready for sanding/recoating: 2½-3 hours* - Light use: 24 hours* - Full hardness: 7 days* 
*under normal climate conditions, 20°C/60% R.H.

 

Preparation

Prior to application the surface must be pre-treated with a waterborne primer from Bona. Ensure floor is acclimatized to its end-use environment, well sanded, dry and free from sanding dust, oil, wax and other contamination. Allow lacquer to reach room temperature, insert filter and shake the container thoroughly before use. Optimal application conditions are between 18-25°C and 30-60% relative air humidity.

High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time. Minimum temperature for use is 13°C.

 

Application

1. Apply the lacquer using a Bona Roller. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps. Allow to dry before applying further layers of lacquer. Anticipate slightly longer drying time for each layer that is applied.
2. If necessary make an intermediate sanding using a screen or the Bona Scrad System grit P150 (or finer) and remove dust before applying the final layer of lacquer. Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required.

The floor will take light foot traffic approximately 8 hours after the final application. Allow the surface to dry for at least 1 week before covering with carpets or other floor coverings, or loading with heavy objects. Also avoid damp mopping the floor during this time.


Cleaning

Cleaning: Wipe tools free from excess lacquer before cleaning with water. Dried material can be removed with acetone

 

Maintenance / Aftercare

Clean the floor with Bona Cleaner or Bona Wood Floor Cleaner and a microfibre pad.(These can be purchased together with a Bona spray mop). For maintenance and upkeep of the surface, floors can be overcoated at intervals with additional coats of lacquer. The frequency of this operation can be greatly reduced if Bona Freshen Up or Bona Wood Floor Refresher is applied periodically. This will restore the appearance of a dull floor whilst still allowing further coats of lacquer to be applied without the need for sanding the floor back to bare timber


Storage / Shelf life

Shelf life: 1 year from date of production in unopened original container
The temperature must not fall below +5°C or exceed +25°C during storage

 

Certifications:

GreenGuard DIBt; safe building product 
EN 14904:2006; approved friction for sports floors
DIN 18032:2; approved friction for sports floors 
EN 13501-1; Reaction to fire
EN 71-3: Application on children’s toys

Product Advantages

Bona Mega Lacquer is a 1 part polyurethane topcoat, so no need for any mixing.
Clean and safe low emissions
Used for heavy domestic traffic and commercial areas
High resistance to scuffing marks and wear
Can be used with underfloor heating
Easy application, with good flow and levelling


Technical Spec
Coverage rate: 8-10 m² /litre (100-120g/m² ) per coat

Drying time, until: - Ready for sanding/recoating: 2½-3 hours* - Light use: 24 hours* - Full hardness: 7 days* 
*under normal climate conditions, 20°C/60% R.H.

 

Preparation

Prior to application the surface must be pre-treated with a waterborne primer from Bona. Ensure floor is acclimatized to its end-use environment, well sanded, dry and free from sanding dust, oil, wax and other contamination. Allow lacquer to reach room temperature, insert filter and shake the container thoroughly before use. Optimal application conditions are between 18-25°C and 30-60% relative air humidity.

High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time. Minimum temperature for use is 13°C.

 

Application

1. Apply the lacquer using a Bona Roller. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps. Allow to dry before applying further layers of lacquer. Anticipate slightly longer drying time for each layer that is applied.
2. If necessary make an intermediate sanding using a screen or the Bona Scrad System grit P150 (or finer) and remove dust before applying the final layer of lacquer. Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required.

The floor will take light foot traffic approximately 8 hours after the final application. Allow the surface to dry for at least 1 week before covering with carpets or other floor coverings, or loading with heavy objects. Also avoid damp mopping the floor during this time.


Cleaning

Cleaning: Wipe tools free from excess lacquer before cleaning with water. Dried material can be removed with acetone

 

Maintenance / Aftercare

Clean the floor with Bona Cleaner or Bona Wood Floor Cleaner and a microfibre pad.(These can be purchased together with a Bona spray mop). For maintenance and upkeep of the surface, floors can be overcoated at intervals with additional coats of lacquer. The frequency of this operation can be greatly reduced if Bona Freshen Up or Bona Wood Floor Refresher is applied periodically. This will restore the appearance of a dull floor whilst still allowing further coats of lacquer to be applied without the need for sanding the floor back to bare timber


Storage / Shelf life

Shelf life: 1 year from date of production in unopened original container
The temperature must not fall below +5°C or exceed +25°C during storage

 

Certifications:

GreenGuard DIBt; safe building product 
EN 14904:2006; approved friction for sports floors
DIN 18032:2; approved friction for sports floors 
EN 13501-1; Reaction to fire
EN 71-3: Application on children’s toys

Additional Information

Additional Information

Show Bona Logo No
Show Uniclic Logo No
Show FSC Logo No
Visit our sister site

{message}

{upsell products}